H Frame Press (Pillar Type) Pneumatic Clutch
- Home
- H Frame Press (Pillar Type) Pneumatic Clutch
H Frame Press (Pillar Type) Pneumatic Clutch
- Inclining Mechanism (for inclinable presses)
- Bar ejector system in slide.
- Gear Guard.
- Fly Wheel & Pneumatic Clutch Guard.
- Electrical Motor (ABB Make)
- Swing type two hand “RUN” Push button panel.
- Automatic Oil Lubrication
- Preset Counter, 6 Digits
- Rotary Cam Switch, 6 Digits
- Die cushion
- Roil feed, coil cradie, scrap cutting etc.
- Special electric controls for air friction clutch
- Pneumatic feed units with decoiler and straightening unit for auto feed line.
- Hydraulic overload System
- Automatic Die Clamping
- Die Lifter.
- Photo electric safety guards.
- Anti Vibration press mounts
- Self standing Die Space Lights
- Portable T stand Two hand RUN
- Foundation Plates, Anchor Bolt
- Die Room Light
- Electronic digital die height indicator
|
CAPACITY |
TONNE |
30 |
50 |
75 |
100 |
150 |
200 |
250 |
300 |
350 |
400 |
500 |
|
AREA OF BOLSTER |
mm |
400 x 400 |
400 x 450 |
500 x 500 |
700 x 700 |
700 x 900 |
700 x 900 |
900 x 900 |
900 x 900 |
1000 x 1000 |
1000 x 1200 |
1250 x 1250 |
|
THICKNESS OF BOLSTER |
MM |
75 |
80 |
90 |
100 |
120 |
150 |
150 |
150 |
150 |
200 |
210 |
|
SLIDE STROKE |
mm |
100 |
100 |
100 |
100 |
150 |
200 |
200 |
250 |
300 |
300 |
300 |
|
NO. OF SLIDE STROKE |
s.p.m |
60 |
50 |
50 |
40 |
30 |
30 |
25 |
20 |
15 |
15 |
15 |
|
ADJUSTMENT OF SLIDE |
mm |
50 |
60 |
70 |
70 |
100 |
100 |
125 |
150 |
150 |
150 |
150 |
|
SHUT HEIGHT |
mm |
220 |
260 |
310 |
350 |
400 |
450 |
450 |
500 |
500 |
500 |
600 |
|
AREA OF SLIDE LRxFB |
mm |
350 x 350 |
400 x 360 |
420 x 400 |
520 x 500 |
700 x 560 |
700 x 560 |
750 x 750 |
750 x 750 |
800 x 800 |
1000 x 1000 |
1050 x 1050 |
|
MAIN DRIVING MOTOR |
kw |
2.2 |
3.7 |
3.7 |
11 |
15 |
15 |
18.5 |
22 |
22 |
30 |
37 |
|
SLIDE ADJUSTMENT MOTOR |
kw |
— |
— |
— |
0.75 |
0.75 |
1.5 |
1.5 |
2.2 |
2.2 |
3.7 |
3.7 |
|
REQUIRED AIR PRESSURE |
kg/cm2 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
SARB heavy duty steel plate fabricated double sided, double column, two point suspension, shrunk in tie rods, 4Pc. Construction fixed stroke, power presses with pneumatic clutch and mechanically interlocked brake unit complete with lubrication device and electro pneumatic safety controls. The machines will be equipped with electrical suitable for 400/440 Volts 3 phase & 50 cycle AC mains.
Shut height at standard stroke is the distance between table surface and slide face with slide at bottom of stroke and adjustment up.
All dimensions are approximate and subject to alteration without notice.
column.