H Frame Press (Pillar Type) Rolling Key Clutch
- Home
- H Frame Press (Pillar Type) Rolling Key Clutch
H Frame Press (Pillar Type) Rolling Key Clutch
- Inclining Mechanism (for inclinable presses)
- Bar ejector system in slide.
- Gear Guard.
- Fly Wheel Guard.
- Electrical Motor (ABB Make)
- Starter (Siemens Make)
- V Belt
- One shot Oil Lubrication Pump (Manual)
- Automatic Lubrication system
- Slide counter balance
- Die cushion
- Roil feed, coil cradie, scrap cutting etc.
- Special electric controls for air friction clutch
- Pneumatic feed units with decoiler and straightening unit for auto feed line.
- Pneumatic Paddel
- Hydraulic overload System
- Automatic Die Clamping
- Die Lifter.
- Photo electric safety guards.
- Vibration Dampening Device
- Self standing Die Space Lights
|
CAPACITY |
TONNE |
30 |
50 |
75 |
100 |
150 |
200 |
250 |
300 |
350 |
400 |
500 |
|
AREA OF BOLSTER |
mm |
400 x 400 |
400 x 450 |
500 x 500 |
700 x 700 |
700 x 900 |
700 x 900 |
900 x 900 |
900 x 900 |
1000 x 1000 |
1000 x 1200 |
1250 x 1250 |
|
THICKNESS OF BOLSTER |
MM |
75 |
80 |
90 |
100 |
120 |
150 |
150 |
150 |
150 |
200 |
210 |
|
SLIDE STROKE |
mm |
100 |
100 |
100 |
100 |
150 |
200 |
200 |
250 |
300 |
300 |
300 |
|
NO. OF SLIDE STROKE |
s.p.m |
60 |
50 |
50 |
40 |
30 |
30 |
25 |
20 |
15 |
15 |
15 |
|
ADJUSTMENT OF SLIDE |
mm |
50 |
60 |
70 |
70 |
100 |
100 |
125 |
150 |
150 |
150 |
150 |
|
SHUT HEIGHT |
mm |
220 |
260 |
310 |
350 |
400 |
450 |
450 |
500 |
500 |
500 |
600 |
|
AREA OF SLIDE LRxFB |
mm |
350 x 350 |
400 x 360 |
420 x 400 |
520 x 500 |
700 x 560 |
700 x 560 |
750 x 750 |
750 x 750 |
800 x 800 |
1000 x 1000 |
1050 x 1050 |
|
MAIN DRIVING MOTOR |
kw |
2.2 |
3.7 |
3.7 |
11 |
15 |
15 |
18.5 |
22 |
22 |
30 |
37 |
|
SLIDE ADJUSTMENT MOTOR |
kw |
— |
— |
— |
0.75 |
0.75 |
1.5 |
1.5 |
2.2 |
2.2 |
3.7 |
3.7 |
|
REQUIRED AIR PRESSURE |
kg/cm2 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
SARB heavy duty steel plate fabricated double sided, double column, two point suspension, shrunk in tie rods, 4Pc. Construction fixed stroke, power presses with pneumatic friction clutch and mechanically interlocked brake unit complete with lubrication device and electro pneumatic safety controls. The machines will be equipped with electrical suitable for 400/440 Volts 3 phase & 50 cycle AC mains.
Shut height at standard stroke is the distance between table surface and slide face with slide at bottom of stroke and adjustment up.
All dimensions are approximate and subject to alteration without notice.